RR-72-2 Ramps

$698.00

Availability: In stock

Technical

  • 100% solid, made with a high-density expanded polystyrene that is coated with a hybrid polyurea.
    • Lightweight, yet strong and durable.
    • Will not rust or transfer heat or cold.
    • No-skid, no-scuff material protects your garage flooring from damage.
    • Comes with a carrying strap for easy transport and storage.
    • Sold as a set of two.
  • Authorized Australian Distributor. Shipping Australia Wide
     

USAGE
• Use on a level, flat surface.
• Ensure that the bottom of each ramp makes full contact with a solid surface.
• Do not exceed the recommended maximum tire width or vehicle weight capacity.
• Never accelerate or apply brakes suddenly. Drive up on ramps in a slow, steady pace.
• When vehicle is in place, put vehicle in park (or in reverse gear for manual transmissions) and set emergency brake.
• Place wheel chocks behind each tire during use.

Qty :

RR-72-2

72″ RACE RAMPS – INITIAL 6.8 DEGREE APPROACH ANGLE

72-inch Race Ramps are for those of you whose cars are really low to the ground. They take our popular 56-inch Race Ramps and integrate the optional XTender directly into the design – creating an angle of approach of only 6.8 degrees. This leads up to a 10.8-degree incline (after the nose of the car has cleared the ramp) to get to a final lift of 8 inches (203mm) off the ground.

Each ramp can hold up to 1,500 pounds (680 Kgs) for a total vehicle weight capacity of 6,000 pounds (6000 Kgs). They have an attached carrying strap for easy transport and storage and split into two interlocking pieces, which gives you even greater manoeuvrability under the car: once your tires are in place (and chocked!), you can remove the incline portion for additional side access. These ramps are constructed using an exclusive, patent process. They are 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight ramp solution that is strong yet durable. They will never rust, transfer Heat or Cold, and won’t skid or scuff your floors.

Technical

SPECIFICATIONS

Sold As: Pair

Length: 72″ (1828mm)

Width: 12″ (305mm)

Height: 10″ (254mm)

Weight: 14 lbs. (6.50 Kgs)

Lift Height: 8″ (203mm)

Maximum Capacity: 1,500 lbs. (680 Kgs)

Maximum Tire Width: 10″ (254mm)

Approach Angle Degree: 6.8°

Material: Expanded foam with traction coating

Colour: Black

 

USAGE

Please ensure that your ramp is damage-free before use. Never use two ramps on the same side of the vehicle. Use on a flat, level surface and ensure that the ramp makes full contact with the ground. Check that your steering wheel is straight and drive up at a slow, steady pace.

 

 

Weight18 kg
Dimensions185 × 38 × 38 cm

Reviews

There are no reviews yet.

Be the first to review “RR-72-2 Ramps”

Your email address will not be published. Required fields are marked *

Loading...